What these controls change
A DualSense Edge profile saves your button and sensitivity choices, so you can try a change and return to familiar controls. The rear trigger stops change how far L2 and R2 move. Shortening that travel to medium or shallow also switches off adaptive trigger effects, the resistance those triggers can provide in supported games. Set up both before playing; this guide covers Sony's controller settings, not a tested GTA VI preset. 1 2 3 4
1. Create and name a profile
Open Settings > Accessories > DualSense Edge Wireless Controller > Custom Profiles. Choose Create Custom Profile, give it a name, and confirm with OK. A new profile starts in the Unassigned Profiles tab. 1
2. Choose one adjustment
Open the profile to change a button assignment, stick response or trigger deadzone. Deadzone determines how much movement is needed before input registers. Start with one change and note it, so you know what to undo. 1
3. Assign it before using it
In Unassigned Profiles, choose Assign beside your profile, then select a shortcut. Hold Fn and press that shortcut's action button to activate it. An occupied shortcut loses its previous assignment, so check its displayed name first. 1
4. Keep the default shortcut handy
Hold Fn and press triangle to select the fixed default profile. Circle, cross and square are available for custom profiles. Fn plus options opens customization again. If buttons behave unexpectedly, also inspect the game's own control settings for conflicts. 1
Check the rear sliders separately
Look at the L2 and R2 stop sliders on the controller's back. Sony lists three travel positions, running from long at the top to medium and short below it. Choose long travel if you want trigger effects available; medium or shallow travel prevents them from working. Returning to the default software profile does not move these physical sliders. Check both sides before blaming a saved profile for missing resistance. 2
Check feedback before the first session
Edge profiles can each have their own vibration and trigger-effect intensity. Check the profile you intend to use, then try it in a game that supports trigger effects. Long trigger travel leaves the feature available, but the game still needs to support it. Use the checks below to separate a profile choice, a hardware position and a connection setting before changing more options. 3 2
Before you play: avoid three common mix-ups
- Creating a profile does not activate it: assign a shortcut, then use it.
- Switching profiles does not reset the rear sliders: inspect L2 and R2 for medium or shallow stops if resistance is missing.
- Connecting a cable does not guarantee USB communication: check the Communication Method setting if you want to play wired.
If you want a wired connection
Plugging in a USB cable does not by itself switch communication away from Bluetooth. Under Settings > Accessories > Controller (General), select Use USB Cable for USB communication; Use Bluetooth keeps the wireless connection even with the cable attached. For the wider speaker and audio setup, follow our DualSense feedback and PS5 audio guide. 3
Related reading
Sources
Before you play: avoid three common mix-ups
PlayStation Support — Set up edge controller PlayStation Support — Personalize edge controller PlayStation Support — Adjust general controller settings
